VViViDHigh Gloss Paint Protection Film (PPF) 12" x 121" inch Self Healing Wrap Guard

works great

Very good price! I recently installed vinyl wrap of the same brand on my cars spoiler and now installed ppf film to make it last longer. For the stubborn corners that won't stick you can carefully use a heat gun (I personally used a hair drier) to warm the film a bit to stick.

I bought this to put a piece across the roof of my Tacoma to keep the roof rack fairing from rubbing into the paint. It should have been an easy application, but it was not. I have 13 years in the autobody and paint industry professionally and have applied countless vinyl decals and clear stone guard protectors. You get what you pay for. This stuff was very difficult to work with and unforgiving. It us not flexible and reacts negatively to minimal heat. The surface of the ppf scratches and scuffs very easily, even with my spreader covered with a clean microfiber. I used water with a couple drops of dawn in it as I have used in the past with success, and although I was able to get all the bubbles out the edges refused to adhere, even after walking away for a bit to let dry.I ended up peeling it off.The finish of the film is splotchy, textured and not a uniform clear, it looks like rattle can clear coat to be honest (was putting it over black paint). I don't recommend this product, it's cheap and it shows. If you are putting this on something you care about and want to look good, spend a little more and get the 3M stuff the pros use.

very nice stuff.

I had a tree branch break my rear window during a storm in my car. Use this plastic to close up the window until repairs are made. Plastic worked great and stayed in placed until repairs were made. Highly recommend.

Compared to other commercial PPF films on the market, this one is quite thin. It came with a very sticky tape to hold the role together and left a sticky residue, so they have to be cut out or cleaned off with mineral spirits. Installed over a shiny carbon fiber part and it was difficult to get all the water bubbles out given how thin it is.

Happy with product. Material is pretty thick and sticks well, will have to see how it holds up but seems as it will be fine.

It’s cheap, and that’s the only positive. It’s a good thing I got so many feet for so cheap, you have to double and triple up compared to a quality 3M product, where you only have to use a small amount to achieve the same results. All this to say, don’t skimp if you want quality.